JIANGSU SUNSHINE SOLARPV TECHNOLOGY CO.,LTD
Xincheng Industrial Park Lijia Town Wujin District, Changzhou City, Jiangsu Province,China
Add to Cart
One Stop Easy Installation Solar Panel Street Light Outside Storage Areas
Allinone solar street light can be installed in may application fields!
Standard:
Carparks, paths and laneways
Private roads, gates and entraces
Remote areas:
Where wiring is nos economical or practical
Safety and security:
Playgrounds, courtyards
Entrances, exits and muster areas
Outside storage areas, perimeter lighting
All In One Solar Led Street Light Introduction
All In One Solar Led Street Light is a new technology for solar street light. With all in one design, its solar panel, LED lamp, Lithium battery and charging controller are all integrated in one body. With this technology, there will be no need for cable and digging battery hole underground. It will be very easy for installation.
In addition, All In One Solar Street Light has adopted the latest intelligent lighting system. The lamp can work automatically based on day and night. There will be three working ways(Motion Sensor/Time Control/Internet Control) according to different requirements. There will be no more setting after your installation.
Where to place the light pole?
To place the light pole into the best spot with good day lighting.The light pole should be the length 4-6m, the thickness 2.0mm with material iron or steel, the diameter 50-90mm.
Unfold the knob of fuse ( see below ) and take out the insulating film if the fuse sockets, to check up if the fuse working right or not, and then tighten.
Place the lamp on the pole by its sleeve, special screw should be used and steady installation should be ensured.
One Stop Easy Installation
All In One Integrated solar LED street lights, are widely used as street lighting, road lighting, garden lighting, landscape lighting, parking lots lighting, courtyard lighting etc. The All In One Integrated solar street lights are the high cost effective solution with lower initial investment and free from labor cost on earthwork construction and installation of batteries, solar panels, and accessories.
No earthwork construction for battery, no labor installation for solar panels and connections, leads to lower initial investment than traditional solar street light system.
80% Energy Saving & ZERO energy cost
As high as 200 lumen/watt system lighting efficiency, 80% energy saving compared to traditional lights. 100% electricity from solar leads to ZERO energy cost of operation.
3-7 Lasting Days in Rainy and Cloudy Days
The light output of full brightness or DIM mode half brightness is controlled by PIR motion sensor detecting any movements.
Solar Led Street Light Specification:
| Lamp Body Material: | ABS | Product Name: | All In One Solar Led Street Light |
|---|---|---|---|
| IP Rating: | IP65 | Light Source: | LED |
| Power Supply: | Solar | Rated Life: | ≥50000hours |
| CRI (Ra>): | 80 | Beam Angle(°): | 120 |
| Application: | Road, Highway, Courtyard, Outdoor, Etc. | Feature: | Integrated All In One |
| Model No. |
Solar Panel |
Life P04 Battery | LED Qty | Installation Height | Irradiated Area | Working Model |
| MYST-125A | 6V12W | 12000MAH | 32 PCS | 3.5-4.5 m | 50-70sqm |
Light control+time control+remote control |
| MYST-125B | 6V15W | 15000MAH | 32 PCS | 3.5-4.5 m | 50-70sqm |
Light control+time control+remote control |
| MYST-125C | 6V20W | 20000MAH | 32 PCS | 3.5-4.5 m | 50-70sqm |
Light control+time control+remote control |
FAQ
1. Are you manufacturer?
Yes,Lasom Lighting team have over 30 experience in lighting business.
2. Can you produce according to the samples or drawings?
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures
3. What is the lead time?
It usually takes 25 to 35 days after sample confirmation and receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
4. What is your terms of delivery?
We accept EXW,FOB,CIF,etc. You can choose the one which is the most convenient or cost effective for you.
5. How to solve the quality problems after sales?
Take photos of the problems and send to us. We will make a satisfied solution for you within 24 hours after we confirm the problems.
6. Do you have any MOQ limit for led light order?
Low MOQ, 1pc for sample checking is available.